ACUVANCE

Lightweight Motor mount spacer For FLEDGE

OP-15091　BLACK　　¥1,800
OP-15092　RED　　　¥1,800
OP-15093　PURPLE　 ¥1,800

It is a spacer inserted between the motor and the motor mount.

It is made lighter by punching.　We also designed the details such as the side logo and edges.
After the spacer and motor are fixed with screws, they are mounted on the chassis. And the motor can be disassembled with the spacers attached, allowing stress-free mounting and disassembly work.
This is a part to eliminate interference between the terminal part and chassis components when FLEDGE is installed, but it can also be used sliding adjustment for the vehicle's weight balance.

［size］
Outer diameter:31.5mm　Inner diameter:18.5mm　thickness:3mm
weight:2.5g（only a spacer）

High power / High speed BLACK ROTOR For FLEDGE

OP-15083　High power ROTOR（LV45）　¥5,000
OP-15094　High speed ROTOR（LV30）　¥5,000

Like the standard FLEDGE rotor, it is a high power and high speed black rotor exclusively for FLEDGE. Uses a neodymium magnet with the highest class of high heat resistance.

By adopting [M.F.C.S.], it is possible to change the rotation and torque characteristics of the motor without impairing the balance such as weight moment.
* [M.F.C.S.] is the industry's first feature in ACUVANCE LUXON AGILE.

※The motor character are going to a rotary type as the LV value decreases, and a torque type as the LV value increases.
※The standard rotor is LV38.
※Not compatible with LUXON AGILE, LUXON BS, LUXON KG, and LUXON.

End-bell FAN Set For FLEDGE

OP-15096　BLACK　　¥5,000
OP-15097　RED　　　¥5,000
OP-15098　PURPLE　 ¥5,000

It is a set of [FAN], [FAN cover], and [Air through end-bell] to change the FLEDGE of "Without FAN" to "With FAN".

End-bell For FLEDGE without FAN

OP-15099　BLACK　　¥1,200
OP-15100　RED　　　¥1,200
OP-15101　PURPLE　　¥1,200

This is an end bell for changing the FLEDGE of "FAN installed specification" to "FAN not installed specification".

Power supply Branch cable For FAN

OP-15079　　¥800

A branch cable for supplying power to multiple FAN's (Include FLEDGE with Cooling fan) from one power terminal.
This is needed when supplying power to the Ray Storm & FLEDGE FAN at the same time when using XARVIS.

Power supply Extension cable For FAN

OP-15080　100mm　　¥600
OP-15081　150mm　　¥600
OP-15082　250mm　　¥800

It is an extension cable for power supply to our FAN (including FLEDGE with Cooling fan)
Use best length extension cable when change the location of FLEDGE.
※200mm extension cable comes with a FLEDGE (With fan).

Power supply Extension cable For FAN

OP-15090　¥650

• This product is a cable for converting our FAN cable (including FLEDGE-equipped FAN) to RX connector and supplying power from the receiver.
  
  ※Compared to the power supply from the cooling FAN terminal of XARVIS/XARVIS XX, the rotation speed of FAN may decrease.
  ※Please use the optional extension cable for FAN power supply (100/150/250mm) for length adjustment.

aluminum blade rotor replacement tool

OP-15056　\2,000

• This tool is essential items such as TF Jacket and Rotor for replacement.

Transforming (TF) jacket for exclusive use of LUXON AGILE

【Front jacket】 ¥4,000
Mist Silver　OP-15043
Red　　　　　OP-15044
Purple　　　 OP-15045

【Rear jacket】 ¥3,000
Mist Silver　OP-15047
Red　　　　　OP-15048
Purple　　　 OP-15049

【end bell】 ¥800
Mist Silver　OP-15051
Red　　　 　 OP-15052
Purple　　　 OP-15053

• It is a transforming (TF) jacket dedicated to the AGILE to freely customize the colors of the front / rear sleeve and the end bell. It is possible to unify all the parts with the same color or to make each part a combination of different colors.
  You can create your own original combo according to the chassis it is mounted on or to the driver's preference.

【examples】

Neodymium rotor with blade dedicated to the AGILE series

OP-15054　¥4,000［LV28］
OP-15055　¥4,000［LV38］
OP-15057　¥4,000［LV42]　

• The [M.F.C.S.] has becomes an important item in the newly released LUXON AGILE,
  It is a neodymium rotor with blade dedicated to the AGILE series.
  Without compromising the balance of weights or momentum, it is possible to change the torque characteristics of the motor.
  * As for the motor characteristics, the smaller the LV value will make the motor smoother, and the larger LV value will make the motor torquier.
  ※ The standard rotor installed is LV30.
  ※ This rotor cannot be used with the LUXON BS, LUXON KG, and LUXON.

Replacement sensor module of the LUXON AGILE series

OP-15041　¥3,200

• It is a replacement sensor module of the LUXON AGILE series. The sensor module has become an integral part with the bearing, It will be necessary to change this module when replacing the bearing on the endbell side.

Remover a front cover of the LUXON BS series

OP-15016　¥1,200

• Use this part when remove a front cover of the LUXON BS series. It is a required item when change a front cover and a neodymium rotor.

Sensor module with bearing for exclusive use of LUXON BS

OP-15017　¥3,200

• It is a sensor module for the exchange of the LUXON BS series. It is one structure with the bearing. When you change a bearing on the end bell side, please change this module.

Front Cover with bearing for exclusive use of LUXON BS

OP-15018　¥1,800

• It is a front cover for the exchange of the LUXON BS series.
  It is one structure with the bearing. When you change a bearing on the pinion gear side, please change this module.

Ring with timing scale for exclusive use of LUXON BS

OP-15019　¥850

• It is a ring with timing scale of the LUXON BS series

End bell for exclusive use of LUXON BS

OP-15020　¥800

• It is end Bell for the replace of the LUXON BS series.

High-power blade rotor for exclusive use of LUXON BS

OP-15021　¥3,800 （φ12.0mm）
OP-15022　¥3,800 （φ12.5mm）
OP-15023　¥3,800 （φ13.0mm）
OP-15024　¥3,800 （φ13.5mm）

• It is a neodymium rotor with blade for exclusive use of the LUXON BS series
  The characteristic of the motor changes. Rotor diameter is big; Torque type, Thin; High RPM type.
  Standard Roter deiamter is 12.3mm.
  It does not fit to LUXON KG and LUXON series.

Neodymium Rotor

OP-87049 ¥3,200 (φ12.5mm)
OP-87053 ¥3,200 (φ12.0mm)
OP-87340 ¥3,200 (φ13.0mm)
OP-87341 ¥3,200 (φ13.5mm)

• Allows you to enjoy a smooth and high rotational feeling.
• Allows you to enjoy torqueful driving.
  Features an in-case, anti-magnet metal that prevents the harmful effects of magnetization towards surrounding objects (cards, watches, etc.) occuring when being transported or stored.
  This product acts as a replacement part for the previously released LUXON.

Flexible Flat Sensor Cord (50mm, 100mm, 250mm)

OP-87292 50mm ¥800
OP-87290 100mm ¥800
OP-87291 250mm ¥1,000

• Compared to common sensor cables, this sensor cord has approximately three times the number of the core wires, and, a thinner diameter. Utilizing the characteristics of a flat cable, a flexibility that allows for easy cord arrangement and a structure that prevents breakage have been realized.
  In addition, its black color has a sharp looking style. With the new 50mm we offer a line-up of three different lengths. (Products meet U.S./Canadian ROAR specifications)

Flat Sensor Cord (100mm, 250mm)

OP-87047 100mm ¥800
OP-87048 250mm ¥1,000

• A cord that connects the sensored brushless amplifier and the motor.
  This cord is available in two types, "100 mm" and "250 mm" and is used when the chassis currently being used requires a different cord length. Like the 200 mm cord that is packaged with the TACHYON, it is an easy to wire flat-type cord. Of course, it can also be used with sensored amps and motors from other companies (Products that meet U.S./Canadian ROAR specifications).

Dress Up Replacement Jacket for LUXON KG

OP-87301 TF Jacket MR (Metallic Red) ¥3,000
OP-87302 TF Jacket MB (Metallic Blue) ¥3,000
OP-87303 TF Jacket MP (Metallic Purple) ¥3,000
OP-87304 TF Jacket BLK (Metallic Black) ¥3,000

• These are special dress-up parts for the LUXON KG Series that allow a uniform color design inside of the chassis. Each of them has a standard bearing. Changing only the upper housing can create a unique color combination.
  
  

[Color]

Bearing Replacer Kit

OP-87293 ¥3,500

• An original replacer that makes it possible to perform replacement without causing damage to the bearings or the motor-internal board.
  The main unit has a built-in hexagonal wrench. Its convenience and beauty as a tool has also been emphasized.

High-tuned Ceramic Ball Bearings

OP-87211 ¥2,000

• Non-magnetic, and with an excellent resistance to heat and wear that deliver stabilized performance.
• Centrifugal force is controlled due to their low volumetric ratio, contributing to improved life span and response.
• Due to its high degree of hardness, it demonstrates excellent resistance to deformation and delivers stable motor rotation